Denne siden vil jeg skrive på engelsk da jeg har kontakt med en del folk i utlandet som er dårlige i norsk. Send meg heller et spørsmål hvis det er noe dere lurer på
Hi folks This site is dedicated to the excellent machine produced by EMCO. The machine is called F1P-CNC and the control is Emcotronic M1. This is not the low-cost version F1-CNC. (F1-CNC don’t have the crt screen on the controller). . You use these files and info on your own risk
Sorry folks my spelling is terrible but I hope you understand some of the things here
Files regarding the Emco F1P CNC with the Emcotronic controller M1:
G17 MSD cassete This is the MP3 ripped of my systemcasset. If you have lost your cassete you could try to copy this spound clip to your own casset and you could start up your machine. This types of cassetes is used in some phone answer machines
G19 MSD cassete This is the MP3 ripped of my systemcasset. If you have lost your cassete you could try to copy this spound clip to your own casset and you could start up your machine. This types of cassetes is used in some phone answer machines
Another option is to type in the parameters in the MON menu (To
enter Mon menu press “Edit” press “M” , “O”, “N” and Enter
|
D0
= 2400 D1
= 1 D2
= 500 D3
= 600 D4
= 3 D5
= 100 D6
= 0 D7
= 0 D8
= 0 D9
= 0 |
L0
= 0 L1
= 0 L2
= 17 L3
= 80 L4
= 1 L5
= 0 L6
= 0 L7
= 0 L8
= 0 L9
= 0 |
R0
= 103.109 R1
= 19.671 R2
= 219.212 R3
= 291.044 R4
= 112.500 R5
= 228,950 R6
= 93,544 R7
= 13.000 R8
= 31.450 R9
= 10.000 |
If you have lost your MSD casette and need to set up your machine use the two files below. This is all the info you need
Emco F1p Monitor parameters. this is example from a machine
Here is how you make a cabel to conect your F1P to your computer. And use standard programs like hyperterminal to transfere data
Emcotronic M1 manual (Norwegian)
EMCO F1P-CNC Service parts manual (English)
EMCOtronic M1 programming manual (English)
EMCOtronic M1 operating manual (English)
Cable from F1PCNC to DB9 Computer PDF
Cable from F1PCNC to DB9 Computer DXF
IGES files:
Clubman.zip Clubman type seat for motorcycles (IGES file)
arrowdisk.zip Rear brake disk to a motorcycle with arrows cuts (IGES file)
Shield.zip A shield i made for someone used as a base for engraving (IGES file)
(Sorry folks have some problems here with the (IGES files)
2D files:
timing.zip A timing plate 1-360 degrees used to do timing (Camshaft and ignition) on motorcycles. But could also be used for other purposes. (DWG file)